Fire Monitor

　　The explosion-proof electronically controlled fire monitor PSKD30/Ex consists of a fire water cannon, wireless remote control, on-site manual control panel, electronic control valve, and control system (remote centralized control, on-site wired control, wireless remote control) ). It is a new type of point-touch remote control fire water monitor product with large flow, concentrated water flow, long range, simple operation, convenient and flexible.

　　Explosion-proof refers to the ability of fire water monitors to resist the impact of explosion, and the fire water monitors can work normally under high temperature and high heat environment. As for the temperature, how high is the heat? This depends on the explosion-proof level of each manufacturer's explosion-proof fire-fighting water monitor. The explosion-proof fire-fighting water monitor of JunXunPu adopts an explosion-proof structure, and the surface of the water monitor can withstand 135 degrees. High temperature, the explosion-proof grade is IIB, and the highest grade is IIC.

　　The PSKD30/Ex explosion-proof fire water monitor can realize three control modes: on-site manual, wireless remote control and remote wired control, and the rotating parts of the fire water monitor are driven by motors. The horizontal rotation control mechanism and the pitch control mechanism can be used in the rotation process automatically lock in any position. The three control modes of on-site control, wireless remote control, and remote wired control can keep firefighters away from the fire scene, effectively protecting the safety of firefighters.

　　It has the advantages of long range, simple and flexible operation, implementation of horizontal and pitch rotation, and can realize the function of rapid positioning, which is conducive to the safe evacuation of firefighters from the fire scene. For safety operators, the explosion-proof fire water monitor can be controlled at the scene through a manual control panel or through a visual screen in the fire control room, and a centralized control cabinet can be used to start the fire water pump for fire fighting operations.

　　Features of the on-site control panel for explosion-proof fire water monitors:

　　1. Control the operation, stop and operation status display of the fire pump group. 

　　2. Both on-site control and wireless remote control can control the up and down, pitch, rotation and DC spray functions of the fire monitor.

　　3. It can control the on-off control of the attached electric valve.  

　　4. The response time of the controller from starting to the gun body is less than 5 seconds, and the action angle error is not more than 5%.

　　5. The on-site control panel is made of 304 stainless steel, and the protection level is not lower than IP66, outdoor type.

　　6. A switch for two control modes: on-site control and wireless remote control.